OREiN - Illuminate for a Better Life The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. Clear the Air with the Right Bathroom Fan Safe & Efficient Previous page Next page OREiN Bathroom Exhaust Fan with Light, 110 CFM, 2.0 Sones, 3CCT & Nightlight Powerful 110-CFM blower to provide a safe and comfortable living environmentBuilt-in energy-efficient DC motor engineered to run continuously for a minimum 50,000 hoursPut the light and fan on separate switches or combine them if necessaryBuilt-in 20W 3000K/4000K/5000K LED Light & 2200K NightlightNOTICE: If the light or the fan do not work, please make sure that the cables to the light and fan are properly connected. And this product only works with 120V.Important: An insulated duct will help prevent condensation when the warm air from the bathroom meets the cold duct in the attic. To prevent the insulation from sliding down the duct, wrap the connections a few times with HVAC tape.That it is common practice in heating and ventilation systems using sheet metal ductwork and fittings or flexible duct work tubing to use duct tape or aluminum tape to ensure air tight seals and improve efficiency.OREiN Bath Fan will take a few seconds to start up, which is normal. The product with DC Motor have a slow start and slow stop mechanism in order to protect the motor better. Just like a car, it takes time to reach the top speed.NOTE: The Install Size is 8.11 in x 7.48 in. If the original hole is too big, you’ll need to patch the ceiling. Cut a piece of drywall to make the ceiling hole the right size for your fan. Attach the drywall filler to a larger piece of wood; set it in the hole and drive screws through the ceiling into the wood. The patched areas can be repaired with spackling compound later.